Victorian Wood Flooring                      -
                                                                                               Tel: 07957987302
 
 
 
 
                                                                                                
 
Engineered Wood Floors
These floors are constructed from several wood plies that are glued together. The centre core is generally a softer wood material and is used to make the tongue and groove. A hardwood finish layer is glued on top of the centre core and another softer wood ply is attached underneath the core. This top ply is also called the finish layer and can be constructed of almost any wood specie.
Wood always wants to expand in a certain direction. In the presence of moisture solid wood planks will always expand across the width of the planks, rather than down the length of the boards. To avoid this problem, manufacturers of engineered planks place each ply in the opposite direction of each other. This is called cross-ply construction. Once the wood layers are glued together the plies will counteract each other which will stop the plank from growing or shrinking with changes in the humidity. Engineered wood floors are designed for the floating installation and can be glued together or some now come with a click system.
 
 
 
 
 
 
 
 
 
 
Pre-finished Wood Flooring
Most factory finished hardwood floors have several coats of finish applied to the wood's surface. As example, many wood floor companies are applying 6-10 coats of a ultra-violet (UV) cured urethane. This would be extremely difficult for someone to duplicate on a job site finish, not to mention how many days it would take. This is one of the reasons why many flooring mechanics, flooring retailers, and builders are pushing pre-finished hardwood floors. Instead of taking several days to install and finish a new hardwood floor a pre-finished hardwood floor is generally done in one day.
 
 
 
 
 
 
 
 
 
 
 
 
Unfinished Wood Flooring
If you want a custom stained hardwood floor, or a wood floor to match existing trim than a unfinished hardwood floor is your answer. Unfinished means you start with a bare hardwood floor and than the floor is sanded, stained, and finished in the home. This can be quite a mess and the process does take several days, but your floor will have a finish to you requirements.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
             Victorian Wood Flooring , 23-25 Jevington Gardene ,Eastbourne ,East Sussex BN21 4HR
                                        Tel:07957987302   Mail: victorianwoodflooring@yahoo.co.uk